CAS No.: | / |
---|---|
Formula: | / |
EINECS: | / |
Bonding Function: | High Temperature Resistant Adhesive |
Morphology: | Solvent |
Application: | Construction |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Features:
After the crack is slotted, clean the slotted joint before injecting the sealant, avoid the glue breaking or falling off due to the poor bonding between the sealant and the road surface, use the high-pressure dust blower to blow away the ash and soil in the slot, ensure the contact between the sealant and the road surface, increase the adhesive force, so as to make the grouting joint effective, and be full, smooth, clean and beautiful; the construction is basically not affected by the temperature, and the Construction under low temperature;construction method is simple, easy to operate and master.
Model
|
LS-100
|
Generator
|
Honda160
|
Crack sealing pressure
|
2Mpa
|
Volts
|
220V
|
Power
|
2KW
|
Speed
|
3600r/min
|
Output speed
|
8-15L/min
|
The length of electric heating tube
|
5m
|
Stirring method
|
Electric stirring
|
Hot melt kettle volume
|
100L
|
Moving method
|
Hand push or pull
|
Combustor
|
Ltalian Riello 445T1 combustor
|
Temperature control system
|
Automatic control by SLA-5000 intelligent digital temperature controller
|
Heating method
|
Conduction oil indirect heating and extemal oil pump circulating heating
|
Filling material heating time
|
About 30 minutes
|
Temperature range
|
0-280ºC
|
Size
|
2000*1000*1300 mm
|
Weight
|
400KGS
|
Suppliers with verified business licenses